EPD Verification Process: A Step-by-Step Guide for LCA Practitioners
Getting an EPD published requires a critical review of your LCA study by an independent verifier, acceptance by a program operator, and registration in a publicly accessible system. This guide explains every step, what verifiers check, common rejection reasons, and realistic timelines and costs.
What EPD Verification Entails
An Environmental Product Declaration (EPD) is a Type III environmental label governed by ISO 14025:2006 and, for construction products, supplemented by EN 15804:2012+A2:2019. Unlike self-declared environmental claims (ISO 14021 Type II) or general environmental labels (ISO 14024 Type I), Type III declarations are based on a verified LCA study conducted according to a Product Category Rule (PCR).
Verification is the independent assessment that:
- The underlying LCA study was conducted according to ISO 14040 and ISO 14044
- The LCA complies with the applicable PCR
- The EPD document accurately represents the LCA results
- Claims made in the EPD are neither misleading nor unsubstantiated
Verification does not certify that the product itself has low environmental impact. It certifies that the environmental impact data has been calculated correctly according to the stated methodology. This distinction matters: a high-impact product can have a fully verified EPD.
Regulatory and Normative Basis
The verification requirement is established in ISO 14025, Section 8: "A third party verification shall be carried out for each type III environmental declaration." The standard further specifies that the verifier must be independent of both the product system owner and the program operator.
For construction products in the EU and many other markets, EN 15804 is the mandatory PCR. EN 15804:2012+A2:2019 added stricter requirements including mandatory modules (A1-A3 are required; others are optional but must follow EN 15804 methodology if included), updated characterization factors (ILCD recommended), and mandatory additional environmental indicators (ionizing radiation, particulate matter, etc.).
Other sector-specific PCRs include: - PCR 2019:14 (The International EPD System) — generic PCR for construction products - ISO 21930:2017 — sustainability in buildings, EPDs for construction products - Various industry-specific PCRs (electronics, textiles, packaging) published by individual program operators
Who Can Be a Verifier
ISO 14025 specifies that the verifier (or verification panel) must be:
- Technically competent in LCA methodology and the product system under review
- Independent of the practitioner, the program operator, and the product owner
- Accredited or accepted by the program operator
Individual Expert Verifiers
Most program operators maintain a roster of approved individual verifiers. Criteria typically include:
- Demonstrated LCA competency (often a minimum of 5-10 completed LCA studies)
- Familiarity with the applicable PCR
- No commercial relationship with the client organization in the preceding 2-3 years
- Adherence to the program operator's verifier code of conduct
Individual expert review is the most common route for straightforward products (single manufacturing site, established PCR, well-characterized system boundary).
Verification Panels
ISO 14025 also permits verification by a panel of at least three members, at least one of whom must be independent of both the practitioner and the program operator. Panels are typically used for:
- Novel product categories where no established PCR exists and the PCR itself is being developed alongside the LCA
- Products with contested methodology choices (e.g., complex co-product allocation in chemicals)
- High-profile EPDs where greater scrutiny adds credibility (major infrastructure materials, products used in public procurement)
Panel review is slower and more expensive than individual review but provides a stronger credibility signal.
Internal vs. Third-Party Verification
ISO 14025 permits internal verification only for EPDs not made publicly available — effectively program-internal documents. Any EPD intended for publication, marketing use, or procurement qualification must use third-party verification. In practice, virtually all EPDs in commercial use are third-party verified.
Some program operators (notably The International EPD System and IBU) additionally require that the verifier is formally accredited by the program operator, not simply selected by the practitioner. This prevents practitioners from selecting verifiers known to apply minimal scrutiny.
Step-by-Step EPD Process
Step 1: PCR Identification
Before beginning the LCA study, identify the applicable PCR. A PCR defines: - The functional unit and declared unit - The system boundary (which lifecycle stages are mandatory) - Which impact categories to report and which characterization factors to use - Specific data collection requirements (e.g., minimum primary data requirements for certain inputs) - Cut-off rules (typically 1% by mass or energy; EN 15804 requires justification for any exclusion)
If no PCR exists for your product category, you have two options: petition the program operator to develop one (a process that can take 12-24 months and requires industry consultation), or use a generic PCR (such as PCR 2019:14) with documented product-specific supplementary requirements.
Step 2: LCA Study Execution
Conduct the LCA study per ISO 14040 and ISO 14044, using the PCR as the governing methodological document. Key deliverables:
- LCA report: the full study documentation, including goal and scope, life cycle inventory (LCI), life cycle impact assessment (LCIA), interpretation, and appendices
- Background database documentation: which version of ecoinvent, GaBi, or other database was used; any modifications to background datasets
- Allocation documentation: if co-products exist, document the allocation method and rationale per PCR requirements
- Sensitivity and uncertainty analysis: required by ISO 14044 for studies intended for comparative assertions; strongly recommended regardless
LCA software choices affect verification outcomes. Tools that produce structured, auditable calculation documentation (showing the link from raw activity data to LCIA results) significantly reduce verifier questions. Tools that produce only summary outputs force verifiers to request detailed calculation workbooks, extending review time.
Step 3: EPD Document Preparation
The EPD document is a structured summary of the LCA results, formatted to program operator requirements. It typically includes:
- Product description and declared unit
- System boundary diagram
- Flow diagram of the product system
- LCI tables (resource consumption, waste flows)
- LCIA results table by lifecycle module
- Data quality and representativeness statement
- PCR reference and study year
- Verification statement
The EPD document is not the LCA report. It is a public-facing summary. The LCA report is the supporting documentation reviewed by the verifier but may not be publicly released.
Step 4: Critical Review (Verification)
The verifier receives the LCA report, EPD document, and supporting data. A thorough critical review per ISO 14044 Section 6.1 examines:
Goal and scope adequacy:** - Is the functional unit appropriate for the product? - Is the system boundary consistent with the PCR? - Are cut-off criteria documented and defensible?
Data quality:** - Are primary data sources documented with collection year and source? - Is the background database version current (most program operators require ecoinvent version within 3 years)? - Are allocation methods consistent with PCR requirements? - Is the primary/secondary data split declared?
LCI completeness:** - Are all significant input and output flows included? - Are any flows excluded, and do exclusions exceed cut-off thresholds?
LCIA correctness:** - Are characterization factors from the required source (EN 15804 requires EF 3.0/3.1 characterization factors for EU EPDs)? - Are results in the correct units? - Are any characterization errors present (common: incorrect GWP100 values for refrigerants, N2O, or SF6)?
EPD document accuracy:** - Do EPD figures match LCA report figures exactly? - Are claims in the EPD supported by the LCA data? - Is the EPD template compliant with the program operator's current format?
The verifier issues a critical review statement (or panel review statement) certifying compliance, or listing deficiencies requiring correction before certification.
Step 5: Program Operator Review and Registration
The program operator (The International EPD System, IBU, EPD Norway, BREEAM, etc.) receives the verified LCA report, EPD document, and verifier's statement. The program operator conducts a format and completeness check — they do not re-do the technical review, which is the verifier's responsibility.
Upon acceptance, the program operator assigns a registration number, publishes the EPD to their public database, and issues a registration certificate. The EPD is now publicly accessible and citable.
Step 6: Maintenance and Renewal
EPDs have a validity period of typically 5 years (per ISO 14025). Before expiry, the EPD must be renewed: the LCA study reviewed against the current PCR version (which may have changed), the background database updated, and a new verification cycle completed. If the product changes significantly during the validity period, an early renewal may be required.
What Verifiers Commonly Reject
The most frequent causes of verification failure or request for additional information:
- Outdated background data: using ecoinvent 3.5 when 3.9 is the current version; the program operator's rules may specify a maximum database age
- PCR non-compliance: applying generic cut-off rules when the PCR specifies stricter requirements; omitting mandatory lifecycle modules
- Allocation errors: using economic allocation when the PCR mandates physical allocation (or vice versa); undocumented allocation choices
- Characterization factor mismatches: GWP100 values from AR4 instead of the required AR5 or AR6; ILCD factors applied where EF 3.1 is required
- EPD-LCA discrepancies: rounding differences between LCA report tables and EPD tables that exceed acceptable tolerance (verifiers check all figures)
- Missing or incomplete sensitivity analysis: required when the LCA involves contested methodological choices
- Scope creep claims: EPD text making claims beyond what the LCA scope supports (e.g., claiming "low carbon" without comparative benchmarks)
- Missing biogenic carbon accounting: EN 15804:2012+A2:2019 requires separate reporting of biogenic carbon uptake and release; studies prepared under the 2012 version often lack this
Timeline and Cost Expectations
| Phase | Typical duration | Cost range (EUR) |
|---|---|---|
| PCR identification and study scoping | 1-2 weeks | Included in LCA fee |
| LCA study execution | 6-16 weeks | 8,000 - 25,000 |
| EPD document preparation | 1-2 weeks | 1,500 - 4,000 |
| Critical review (individual verifier) | 4-8 weeks | 3,000 - 8,000 |
| Critical review (panel) | 8-16 weeks | 8,000 - 20,000 |
| Program operator registration | 2-4 weeks | 500 - 2,000 |
| **Total (individual verifier route)** | **14-28 weeks** | **13,000 - 39,000** |
Cost and timeline drivers: - Product complexity: multi-site production, complex supply chains, and co-products all increase study scope - Primary data availability: facilities with documented energy management systems complete data collection faster - PCR familiarity: established PCRs (EN 15804, PCR 2019:14) have clear requirements; novel PCRs require more verifier judgment - Verifier availability: high-demand verifiers (those with construction materials and electronics expertise) have 6-12 week backlogs
How Software Tools Affect Verification Outcomes
LCA software affects verification in two ways:
Documentation quality: Software that produces structured, traceable calculation documentation — showing the path from raw activity data through emission factors to LCIA results — allows verifiers to efficiently audit calculations. Tools that produce only summary outputs require practitioners to prepare supplementary calculation workbooks, adding 10-20 hours of practitioner time and 5-10 hours of verifier review time per study.
PCR compliance aids: Software with PCR-specific templates (mandatory module structures, required impact categories, correct characterization factor sets) reduces the risk of PCR non-compliance errors. Tools that allow practitioners to configure arbitrary scope and impact categories require verifiers to manually check compliance, increasing review time and error risk.
Platforms such as ClimatePoint, SimaPro, OpenLCA, and One Click LCA differ significantly in how they structure calculation documentation and PCR compliance enforcement. For EPD programs running more than a handful of studies per year, software that produces verifier-ready documentation packages measurably reduces total cost per EPD.
How ClimatePoint Supports Efficient EPD Verification
In ClimatePoint, ClimatePoint's analysts or your own team build the LCA model in the platform and generate an LCA project report aligned to EN 15804+A2 and PCR 2019:14 requirements, with traceable calculation paths from primary data inputs to LCIA results. The platform's built-in DQR scoring and primary data share tracking directly address the data quality checks verifiers perform most frequently.
The calculation trail is structured in the platform rather than reconstructed from spreadsheets, so the verifier can follow each result back to its inputs. ClimatePoint generates the project report and a draft EPD in the platform; an independent third-party verifier verifies the EPD, and the EPD programme operator registers and publishes it.
Book a call at climatepoint.com to see the LCA project report and draft EPD that ClimatePoint generates for your verifier.
